Insert Bearings Spherical OD
UC200 Insert ball bearing with wide inner ring and two set screws. Spherical OD and grease feeding groove. UC Series Insert Bearings has a set screw locking and is held in position on the shaft by two set screws which are directly on the extended end of the inner ring. UC200 Series Insert Ball Bearings are self-aligning for standard load capacity.Thrust spherical plain bearings are available with sliding contact surface combination steel/PTFE FRP which are suitable for single direction axial loads or combined axial and radial loads.They have low coefficient of friction and are relatively insensitive to contaminants.
Insert bearings (SKF Y-bearings) are based on sealed deep groove ball bearings in the 62 and 63 series, but have a convex outer ring and in most cases an extended inner ring with a specific locking device, enabling quick and easy mounting onto the shaft.
- TIMKEN GY1111KRRB TDCF SGT Insert Bearings Spherical OD
- 6 Days or more
- Radial
- DODGE INS-IP-607R Insert Bearings Spherical OD
- Insert Bearing Unit
- Bearing Steel
- DODGE INS-IP-515R Insert Bearings Spherical OD
- 6
- Available
- DODGE INS-IP-507R Insert Bearings Spherical OD
- Flanged Pilot Type
- Bearings with Housin
- 31.75 mm x 72 mm x 33 mm SKF YAT 207-104 Insert Bearings Spherical OD
- EE843220
- 1030000 lbf
- 17 mm x 40 mm x 19,05 mm TIMKEN GRAE17RRB Insert Bearings Spherical OD
- 32400 lbf
- 44500 lbf
- 42,8625 mm x 85 mm x 30,18 mm TIMKEN RA111RRB Insert Bearings Spherical OD
- 1.4440 in
- 74700 lbf