NTN Bearing Driveshaft do Brasil

Insert Bearings Spherical OD

UC200 Insert ball bearing with wide inner ring and two set screws. Spherical OD and grease feeding groove. UC Series Insert Bearings has a set screw locking and is held in position on the shaft by two set screws which are directly on the extended end of the inner ring. UC200 Series Insert Ball Bearings are self-aligning for standard load capacity.Thrust spherical plain bearings are available with sliding contact surface combination steel/PTFE FRP which are suitable for single direction axial loads or combined axial and radial loads.They have low coefficient of friction and are relatively insensitive to contaminants.

Insert bearings (SKF Y-bearings) are based on sealed deep groove ball bearings in the 62 and 63 series, but have a convex outer ring and in most cases an extended inner ring with a specific locking device, enabling quick and easy mounting onto the shaft.

25 mm x 52 mm x 34,11 mm TIMKEN GYE25KRRB SGT Insert Bearings Spherical OD: T max. : 100 °C; C0 : 15.2 kN

17 mm x 40 mm x 27,38 mm TIMKEN GYE17KRRB Insert Bearings Spherical OD: Specifications : Standard; Outer Ring : With Outer Ring

50 mm x 90 mm x 44,3 mm TIMKEN GYAE50RRB Insert Bearings Spherical OD: Size Standards : Metric System; d : 60

50,8 mm x 90 mm x 44,3 mm TIMKEN GYA115RRB2 Insert Bearings Spherical OD: Number of Raceway Ring Rows : Single Row; Rolling Element Material : Steel

61,9125 mm x 110 mm x 65,07 mm TIMKEN GY1207KRRB Insert Bearings Spherical OD: Bearing Type : Deep Groove Ball Bea; Number of Bearings : Single

50,8 mm x 90 mm x 51,59 mm TIMKEN GY1115KRRB3 Insert Bearings Spherical OD: J : 105 mm; T max. : 100 °C

41,275 mm x 85 mm x 49,22 mm TIMKEN GY1110KRRB SGT Insert Bearings Spherical OD: Retainer : Yes; Characteristic inner ring frequency, BPFI : 9.63 Hz

74,6125 mm x 140 mm x 77,80 mm TIMKEN GYM1215KRRB Insert Bearings Spherical OD: Max operating temperature, Tmax : 200 °C; rs min : 1.1 mm

49,2125 mm x 100 mm x 55,55 mm TIMKEN GYM1115KRRB Insert Bearings Spherical OD: Width T(mm) : 13; Flange O.D. H(φ) : 47

55,5625 mm x 110 mm x 65,07 mm TIMKEN GYM1203KRRB Insert Bearings Spherical OD: Nlim (grease) : 16,000 rpm; Mass : 0.11 kg

38,1 mm x 85 mm x 49,22 mm TIMKEN GYM1108KRRB Insert Bearings Spherical OD: L : 100 mm; N : 23mm

36,5125 mm x 80 mm x 49,22 mm TIMKEN GYM1107KRRB Insert Bearings Spherical OD: Static load, C0 : 3.35 kN; Characteristic rolling element frequency, BSF : 4.47 Hz