Cam Follower and Track Roller - Stud Type
Stud-type track rollers, such as cam followers, have a built-in threaded rod, instead of an inner ring, for either threaded mounting or through-hole mounting onto machine components. Through-hole mounting uses a hexagonal nut on the threaded end to secure the bearing into place. Yoke-type track rollers, such as roller followers.
Stud type track roller bearings CFS3V IKO cam follower bearings is roller bearings with cylindrical rollers that are small in diameter. In spite of their low cross section, needle roller bearings have a high load carrying capacity and are therefore extremely.Cam Followers (Stud Type Track Rollers) Without seal With seal 1. Types Cam followers are available in the standard types shown in Table 1. These standard bearings have a screwdriver slot built into the stud head, while the outer rings have a cylindrical outside surface. Cam followers, which are equipped with a thick outer ring.
- MCGILL MCFR 52 BX Cam Follower and Track Roller - Stud Type
- 34.90 mm
- 49400 N
- MCGILL MCFR 52 S Cam Follower and Track Roller - Stud Type
- 218.00 KGS
- 192mm
- MCGILL MCFR 52 SB Cam Follower and Track Roller - Stud Type
- 52.00 mm
- 3000 rpm
- MCGILL MCFR 47A SB Cam Follower and Track Roller - Stud Type
- 13.5 mm
- 1.5 mm
- MCGILL MCFR 47A X Cam Follower and Track Roller - Stud Type
- 1.00 mm
- 30.20 mm
- MCGILL MCFR 47A BX Cam Follower and Track Roller - Stud Type
- bs2-2214-2rsk/vt143-
- 228
- MCGILL MCFR 47 X Cam Follower and Track Roller - Stud Type
- 1960 N
- 10.000 mm
- MCGILL MCFR 47 SBX Cam Follower and Track Roller - Stud Type
- 16.7 mm
- 266 mm
